Wireless Camera kit with 7" monitor compatible with Furrion® Pre-wire

In Stock
SKU:
CS-7FW
$274.00
 
Wireless Camera kit with 7" monitor compatible with Furrion® Pre-wire is available to buy in increments of 1

Is your camper pre-wired for a Furrion® camera system?  Easily connect this wireless camera kit to your pre-wired RV or trailer!  This kit will allow you to use the pre-wire setup on your camper and view this camera on the included 7” display monitor. Just the right size for your dash!

Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV.  This kit adds the convenience of a wireless rear camera to the back of your trailer. Our camera adapter plate fits perfectly into the Furrion® housing and with the included power pigtail you can plug directly into the existing pre-wired port.  This monitor will allow you to view the camera at any time going down the road to check cargo and traffic and in reverse so you'll be able to see behind your trailer while backing up without having to have a spotter guiding you.  

This monitor also allows for one additional wired camera.  Therefore, you can expand the system at any time possibly adding a side camera. 

Kit Includes:

  • Digital wireless camera with Furrion® compatible power pigtail
  • Furrion® compatible adapter bracket- Perfect fit to adapt our camera to the existing bracket
  • Wireless receiver
  • 7" digital flat panel monitor - connect up to two cameras, switch between views with a button on the front of the display or use the included remote.
  • Power module
  • Install instructions

Wireless Camera specs:

  • 1/4" Sony Color CMOS for ultimate clarity
  • 2.5mm lens
  • 700 TVL resolution - the best clarity you will find in a wireless camera!
  • 0 LUX min illumination. 12 IR LED's for clear night vision even in complete blackness, night range up to 15 meters
  • Aluminum alloy weather tight casing - steel mount bracket included
  • 2.4GHz Digital FHSS Hopping and Pairing Technology, 2400-2483.5MHz frequency
  • IP69 waterproof, shockproof, dustproof, resistance to high temperature and humidity
  • Industry leading 3 year warranty!

Monitor specs:

  • screen size: 7 inch (diagonal length)
  • High resolution
  • 16 : 9 wide screen display
  • NTSC system 
  • 1024x600 resolution
  • Power supply is DC 12 V/24V compatible
  • Remote control, OSD menu;
  • (2) 4 PIN connectors
  • 1 year monitor warranty!
More Information
SKU CS-7FW
Agriculture / Commercial Agriculture
Cam Only/Complete Kit Complete Kit
Video Input Type 4 pin/convert to RCA with adapter
Number of Triggers 1
Split Screen No
Video System NTSC/PAL Auto Switching
Impact Rating 4G Monitor, 20G Camera
Bracket Type Pedestal monitor bracket, steel camera u bracket
Waterproof/Dustproof Level IP 69 Cameras
Night Vision 0 Lux
Power Supply 12 Volts
Sound Options Without Microphone
System Manufacturer EVI Systems
Camera Resolution 700 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Commercial 4 Pin Coax
Sensor Type CCD
System Type Standard Build
Sensor Brand Sony
Viewing Angle 150 Degrees
Includes Remote Yes
Camera Input Ports 2
Audio Input Ports None
Warranty 3 Year
Camera Type Rear Camera, Trailer/Camper/5th Wheel camera
Vehicle Category Truck, Camper/Trailer (if needing standalone system), Farm Equipment, Fleet Vehicle (i.e. cargo van), Construction Equipment (i.e. bulldozer), RV, UTV/ATV, Universal
Number of Cameras 1
Reason for Shopping Adding the camera(s)
Camera Mount Location Universal Mount
For a monitor it uses Packaged w/Aftermarket Monitor
Monitor Size 7"

12 volt DC systems. Universal design will fit on anything! Compatible with Furrion pre-wire trailers.  

 

Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV.  The included wireless receiver will connect directly to the 7 inch monitor creating the wireless connection to the camera.  

The included power module makes installation easy as there's no need to locate a 12 volt power source for the monitor and wireless receiver.  

Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account