Wireless Camera kit with 10" monitor compatible with Furrion® Pre-wire
Wireless camera kit compatible with Furrion® pre-wire
Is your camper pre-wired for a Furrion® camera system? Easily connect this wireless camera kit to your pre-wired RV or trailer! This kit will allow you to use the pre-wire setup on your camper and view this camera on the included 10” display monitor.
Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV. This kit adds the convenience of a wireless rear camera to the back of your trailer. Our camera adapter plate fits perfectly into the Furrion® housing and with the included power pigtail you can plug directly into the existing pre-wired port. This monitor will allow you to view the camera at any time going down the road to check cargo and traffic and in reverse so you'll be able to see behind your trailer while backing up without having to have a spotter guiding you.
This monitor also allows for three additional wired cameras. Therefore, you can expand the system at any time possibly adding side cameras for additional safety while changing lanes.
Kit Includes:
- Digital wireless camera with Furrion® compatible power pigtail
- Furrion® compatible adapter bracket- Perfect fit to adapt our camera to the existing bracket
- Wireless receiver
- 10" digital flat panel monitor - connect up to four cameras total, switch between views with a button on the front of the display or use the included remote.
- 12 volt Power module
- Install instructions
Wireless Camera specs:
- 1/4" Sony Color CMOS for ultimate clarity
- 2.5mm lens
- 700 TVL resolution - the best clarity you will find in a wireless camera!
- 0 LUX min illumination. 12 IR LED's for clear night vision even in complete blackness, night range up to 15 meters
- Aluminum alloy weather tight casing - steel mount bracket included
- 2.4GHz Digital FHSS Hopping and Pairing Technology, 2400-2483.5MHz frequency
- IP69 waterproof, shockproof, dustproof, resistance to high temperature and humidity
- Industry leading 3 year warranty!
Monitor specs:
- screen size: 10.1 inch (diagonal length)
- Built-in quad display
- High resolution
- 16 : 9 wide screen display
- PAL& NTSC system auto switching
- 1024x600 resolution
- Power supply is DC 12 V/24V compatible
- Remote control, OSD menu
- (4) 4 PIN connectors
- Inputs for up to 4 cameras
- 1 year monitor warranty
| SKU | CS-10FW |
|---|---|
| Agriculture / Commercial | Agriculture |
| Cam Only/Complete Kit | Complete Kit |
| Screen Resolution | 1024x600 |
| Video Input Type | 4 pin/convert to RCA with adapter |
| Number of Triggers | 3 |
| Split Screen | No |
| Video System | NTSC/PAL Auto Switching |
| Overall Dimensions | 240 x 163 x 26 mm |
| Impact Rating | 4G Monitor, 20G Camera |
| Bracket Type | Steel monitor u bracket, steel camera u bracket |
| Waterproof/Dustproof Level | IP 69 Cameras |
| Night Vision | 0 Lux |
| Power Supply | 12 Volts |
| Sound Options | Without Microphone |
| System Manufacturer | EVI Systems |
| Camera Resolution | 700 TVL |
| Parking Guidelines | Not Available |
| Camera Orientation | Rear Facing |
| Fit Type | Universal fit |
| Connection | Commercial 4 Pin Coax |
| Sensor Type | CCD |
| System Type | Standard Build |
| Sensor Brand | Sony |
| Viewing Angle | 150 Degrees |
| Includes Remote | Yes |
| Camera Input Ports | 4 |
| Warranty | 3 Year |
| Camera Type | Rear Camera, Trailer/Camper/5th Wheel camera |
| Vehicle Category | Truck, Camper/Trailer (if needing standalone system), Farm Equipment, Fleet Vehicle (i.e. cargo van), Construction Equipment (i.e. bulldozer), RV, Universal |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Wireless |
| Camera Mount Location | Universal Mount |
| For a monitor it uses | Packaged w/Aftermarket Monitor |
| Monitor Size | 10" |
12 volt DC systems. Universal design will fit on anything! Compatible with Furrion pre-wire trailers.
Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV. The included wireless receiver will connect directly to the 10 inch monitor creating the wireless connection to the camera.
The included power module makes installation easy as there's no need to locate a 12 volt power source for the monitor and wireless receiver.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount