Need Help? 888.844.9763

Wireless Camera Kit for Ford® 4.2" Factory Display Fits Furrion® Prewire -View In Reverse

Availabilty: In stock
SKU
CS-FFW-FI-42
$302.00
 

Pre-wire Furrion® adapter kit for factory display

Is your camper pre-wired for a Furrion® camera system?  Wouldn't it be great if you could view the camper camera on your factory display?  We have a solution!  This kit will allow you to use the pre-wire setup on your camper and view this camera on your factory display!  
 
This kit includes a video harness that connects to your factory radio display and allows you to toggle between your factory installed back up camera and this digital wireless camera when in reverse.  Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV.  The included wireless receiver and video switcher harness connect to the same port on the back of your factory display that your factory rear camera uses.  The included switcher harness allows you to choose which camera you want to display when in reverse by flipping a switch.    
 
This kit adds the convenience of a wireless rear camera to the back of your trailer. Our camera adapter plate fits perfectly into the Furrion® housing and with the included power pigtail you can plug directly into the existing pre-wired port.  You'll be able to see behind your trailer while backing up without having to have a spotter guiding you.  
 
 

Notes about the included switcher harness:

  • Truck must have a rear view camera that was installed at the factory and is displayed on your factory MyFord® 4.2" radio screen. *Check compatibility tab to confirm model years.
  • Kit includes a harness that allows you to connect both your factory tailgate camera and this digital wireless camera to your factory radio.  

Kit Includes:

  • Digital wireless camera with Furrion® compatible power pigtail
  • Furrion® compatible adapter bracket- Perfect fit to adapt our camera to the existing bracket
  • Wireless receiver
  • Integration harness for MyFord® 4.2" display.
  • Power module
  • Wire connectors
  • Zip ties
  • Install instructions

Wireless Camera specs:

  • 1/4" Sony Color CMOS for ultimate clarity
  • 2.5mm lens
  • 700 TVL resolution - the best clarity you will find in a wireless camera!
  • 0 LUX min illumination.  12 IR LED's for clear night vision even in complete blackness, night range up to 15 meters
  • Aluminum alloy weather tight casing - steel mount bracket included
  • 2.4GHz Digital FHSS Hopping and Pairing Technology, 2400-2483.5MHz frequency
  • IP69 waterproof, shockproof, dustproof, resistance to high temperature and humidity
  • Industry leading 3 year warranty!

 

 **Display not included** This kit connects to your existing factory display.  

Furrion® and the Furrion® logo and device are trademarks or registered trademarks licensed by Furrion Ltd. in the United States and/or other countries. Furthermore, all product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

More Information
SKUCS-FFW-FI-42
Cam Only/Complete KitComplete Kit
Bracket Typesteel mount
Vehicle InterfaceIncludes Factory Integration Module
Waterproof/Dustproof LevelIP 69 Cameras
Night Vision0 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution700 TVL
Parking GuidelinesNot Available
Camera OrientationRear Facing
ConnectionPlug and Play to Factory Dash Display
Sensor TypeCCD
System TypeWireless
Sensor BrandSony
Viewing Angle150 Degrees
Camera Input Ports4
Warranty3 Year
Camera TypeRear Camera, Trailer/Camper/5th Wheel camera
Vehicle CategoryTruck, Camper/Trailer (if connecting to vehicle wiring)
Number of Cameras1
Reason for ShoppingAdding the camera(s)
Wiring TypeWireless
For a monitor it usesYour factory display
Radio Screen Size4.2” Ford
MakeFord
ModelF-150,Super Duty
Year2013,2014,2015,2016,2017,2018,2019,2020
Make FilterFord
Model FilterF-150, Super Duty
Year Filter2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

2013-2020 Ford® F150 trucks with a factory tailgate camera and 4.2" factory display. 

2013-2021 Ford® Super Duty trucks with a factory tailgate camera and 4.2" factory display.

Only compatible with MyFord® 4.2" factory displays. 

Remove the radio to gain access to the factory camera connector, install new multi-cam interface and wireless receiver with power module.  Connect power module directly to vehicle battery.
 
Install the digital wireless camera on the back of your trailer using the Furrion® compatible adapter bracket and plug in power pigtail. No drilling or wiring required at the camera!   
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies