Wireless Camera Kit for GM® Truck IO5/IO6 Factory Display Fits Furrion® Prewire -View On Demand

In Stock
80% of 100
Wireless Camera Kit for GM® Truck IO5/IO6 Factory Display Fits Furrion® Prewire -View On Demand is available to buy in increments of 1
Is your camper pre-wired for a Furrion® camera system?  Wouldn't it be great if you could view the camper camera on your factory display?  We have a solution!  This kit will allow you to use the pre-wire setup on your camper and view this camera on your factory display!  
This kit includes a multi-cam interface that connects to your factory radio display and allows you to view your digital wireless camera at anytime going down the road or when in reverse.  Our digital wireless camera comes with an adapter bracket and power pigtail to connect directly to the existing pre-wired Furrion® system on your trailer or RV.  The included wireless receiver and interface module connect to the same port on the back of your factory display that your factory rear camera uses.  The interface module allows you to choose which camera you want to display.    
This kit adds the convenience of a wireless rear camera to the back of your trailer. Our camera adapter plate fits perfectly into the Furrion® housing and with the included power pigtail you can plug directly into the existing pre-wired port.  You'll be able to see behind your trailer while backing up or without having to have a spotter guiding you.  Also have your passenger view cargo and traffic behind the trailer while in motion.  

Notes about the included interface module:

  • Truck must have a rear view camera that was installed at the factory and is displayed on your factory IO5 or IO6 radio screen (2014-2019 models only)
  • Kit includes a harness that allows you to connect both your factory tailgate camera and this digital wireless camera to your factory radio.  

Kit Includes:

  • Digital wireless camera with Furrion® compatible power pigtail
  • Furrion® compatible adapter bracket- Perfect fit to adapt our camera to the existing bracket
  • Wireless receiver
  • Integration module for GM® IO5 or IO6 display.
  • Wire connectors
  • Zip ties
  • Install instructions

Wireless Camera specs:

  • 1/4" Sony Color CMOS for ultimate clarity
  • 2.5mm lens
  • 700 TVL resolution - the best clarity you will find in a wireless camera!
  • 0 LUX min illumination.  12 IR LED's for clear night vision even in complete blackness, night range up to 15 meters
  • Aluminum alloy weather tight casing - steel mount bracket included
  • 2.4GHz Digital FHSS Hopping and Pairing Technology, 2400-2483.5MHz frequency
  • IP69 waterproof, shockproof, dustproof, resistance to high temperature and humidity
  • Industry leading 3 year warranty!


 **Display not included** This kit connects to your existing factory display.  Not compatible with IOB display.

Furrion® and the Furrion® logo and device are trademarks or registered trademarks licensed by Furrion Ltd. in the United States and/or other countries. Furthermore, all product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

More Information
Cam Only/Complete Kit Complete Kit
Bracket Type Steel
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 69 Camera
Night Vision 0 Lux
Power Supply 12 Volts
System Manufacturer EVI Systems
Camera Resolution 700 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Sensor Type CCD
System Type Wireless
Sensor Brand EVI Systems
Viewing Angle 150 Degrees
Warranty 3 Year
Camera Type Rear Camera, Trailer/Camper/5th Wheel camera
Vehicle Category Truck, Camper/Trailer (if connecting to vehicle wiring)
Number of Cameras 1
Reason for Shopping Adding the camera(s)
Wiring Type Wireless
Camera Mount Location Camper/Utility Bed
For a monitor it uses Your factory display
Radio Screen Size 4.2" MyLink, 8" MyLInk/Intellilink
Make Chevrolet,GMC
Model Sierra,Sierra HD,Silverado,Silverado HD
Year 2014,2015,2016,2017,2018

2014-2019 Sierra® or Silverado® with IO5 or IO6 factory radio and factory installed tailgate camera. To confirm radio type, locate the Service Parts Identification sticker in your glove box or on the driver's side door jam(2018+). Look for code IO5 or IO6 on this sticker to confirm compatibility. See images for example.

Will not work with 7" IOB screen.  See SKU: CS-GMFW-VIOB for IOB display.

Remove the radio to gain access to the factory camera connector, install new multi-cam interface and wireless receiver.
Install the digital wireless camera on the back of your trailer using the Furrion® compatible adapter bracket and plug in power pigtail. No drilling or wiring required at the camera!   
Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account