Multiplexer Control Box
This camera multiplexer can be used to make a monitor that has a single input and expand it to have 3. All 3 inputs are full color and are compatible with our monitors and cameras.
You can set the delay to scroll through each camera fast or slow. Or press the function switch to manually switch between cameras.
Also has a reverse trigger wire that can be connected to allow one camera to come on automatically when the vehicle is put in reverse.
If you intend to use your screen while driving down the road or changing lanes you can also use this multiplexer as an observation platform and it will stay on continuously scrolling through each camera.
30 day warranty/return policy
|Power Supply||12-24 Volts|
|System Manufacturer||EVI Systems|
Compatible with any NTSC/PAL/AHD 4 pin monitor and camera system. Compatible with 12V-24V systems.
Connect control box to 12V-24V. Connect camera(s) to inputs on multiplexer box. Connect output wire to multiplexer box and then connect to your monitor. A 4 pin to RCA conversion cable may be required depending on the input on your monitor.