GM 3rd Brake Light Camera for Trucks w/ IOB Display & Factory Camera
This kit includes a plug and play harness that will allow you to use your factory radio display and toggle between your factory installed tailgate camera and this third brake light camera when in reverse. This is a trim bezel with premounted camera that fits behind your factory 3rd brake light and adds the rear camera convenience to the top of your cab! Now you can see your fifth wheel or anything else that is inside your bed without having to have a spotter guiding you for trailer connections etc. Adds a trim bezel with premounted camera to your factory third light assembly and the camera connects to the same connector that your factory rear camera uses. The included plug and play harness allows you to choose which camera you want to display when in reverse. A switch determines which camera will be displayed when in reverse.
Notes about the included integration harness:
- Truck must have a rear view camera that was installed at the factory and is displayed on your factory 7" IOB radio screen Display not included. Vehicle must have the IOB option code on the sticker in the glove box.
- Kit includes a plug and play harness that allows you to connect both your factory tailgate camera and this 3rd light camera to your factory radio. The switch allows you to choose which one is displayed in reverse.
- OEM grade 3rd brake light housing/light assembly with integrated camera
- HD CMOS, high resolution color and night vision
- Adjustable view, swivel head allows you to aim the camera where needed
- 500 TV Lines of resolution
- 150 degree view
- <.2 LUX night vision
- 3 Year warranty
**Display not included** This kit connects to your factory IOB display.
|Vehicle Interface||Not Included|
|Night Vision||< .2 Lux|
|Power Supply||12 Volts|
|System Manufacturer||EVI Systems|
|Camera Resolution||500 TVL|
|Camera Orientation||Rear Facing|
|Fit Type||Factory OE Fit Replacement|
|Connection||RCA with opt. Factory Interface|
|Sensor Brand||EVI Systems|
|Viewing Angle||150 Degrees|
|Reason for Shopping||Adding the camera(s)|
|Wiring Type||Hard Wired|
|For a monitor it uses:||Your factory display|
|Model||Sierra,Sierra HD,Silverado,Silverado HD|
2016+ Sierra or Silverado with the 7" IOB factory radio.
NOTE: truck must have had a tailgate camera displayed on the radio from the factory for this kit to work and the IOB option code on the sticker in the glove box.
Remove your factory 3rd brake light and install the trim bezel from this kit, then reinstall your factory light. Remove the radio to gain access to the camera connector, install new plug and play harness, route camera harness to the T-harness and make connections. Power connections for camera must also be made inside the cab.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P