Commercial Second Cam option for Ford Trucks w/ 4.2" Factory Display
This kit includes a harness that will allow you to use your 4.2" factory radio display and toggle between your factory installed back up camera and this commercial camera when in reverse. The camera connects to a video switcher harness that connects to the same connector on the back of your factory 4.2" display that your factory rear camera uses.
This kit comes in handy when you have a trailer behind the truck since the rear of the trailer is a serious blind spot! This kit is designed to solve that problem by adding the second rear camera on the rear of the truck or trailer. This camera has built in LED's for better night vision. Comes with everything you need to install the camera on the rear of the trailer and run a 4 pin coax to the cab to connect to the video switcher. Optional trailer quick disconnect system allows you to disconnect your trailer with ease by making the camera connections as simple as unplugging the lights of the trailer.
The included video switcher harness allows you to choose which camera you want to display when in reverse by flipping a switch.
Notes about the included integration cable:
- Truck must have a rear view camera that was installed at the factory and is displayed on your 4.2" factory radio screen
- Kit includes a video switcher harness that allows you to connect both your factory tailgate camera and this commercial camera to your factory radio. The switch allows you to choose which one is displayed in reverse.
- Commercial grade night vision camera with 700 TV lines of resolution Sony CCD sensor (CS-UCCD-SONY)
- Camera special design allows it to be used with North American factory navigation units
- 64' length 4 pin coaxial weather proof cable (CS-UC20)
- 4 pin male to RCA conversion harness so that you can connect to the video switcher
- All connections are weather tight except those made inside the cab!
- Integration harness with toggle switch for Ford 4.2" display
- OPTIONAL: Trailer quick disconnect system for easy camera connections - weather tight! (CS-UTQC)
- Install instructions
- 1 Year warranty
- 1/3" Sony CCD for the highest clarity available
- 700 TV lines of resolution
- 150 degree field of view
- IR LED's for clear night vision even in complete blackness
- Weather grommet for easy cable passage to the interior
- Aluminum alloy weather tight casing with IP68 water resistance
- Weather tight screw connectors for extremely secure and dry connections
- 1 Year Warranty
|Night Vision||0 Lux|
|Power Supply||12 Volts|
|System Manufacturer||EVI Systems|
|Camera Resolution||700 TVL|
|Parking Guidelines||Not Available|
|Camera Orientation||Rear Facing|
|Fit Type||Universal fit|
|Connection||RCA with opt. Factory Interface|
|Sensor Brand||EVI Systems|
|Viewing Angle||150 Degrees|
|Camera Input Ports||1|
|Camera Type||Rear Camera, Trailer/Camper/5th Wheel camera|
|Vehicle Category||Truck, Camper/Trailer (if connecting to vehicle wiring)|
|Number of Cameras||1|
|Reason for Shopping||Adding the camera(s)|
|Wiring Type||Hard Wired|
|Camera Mount Location||Universal Mount|
|For a monitor it uses||Your factory display|
|Radio Screen Size||4.2” Ford|
2013-2021 Ford F150 trucks with a factory tailgate camera and 4.2" factory display.
2013-2021 Ford Super Duty trucks with a factory tailgate camera and 4.2" factory display.
Remove the radio to gain access to the camera connector. Install video switcher harness.