Universal Front Camera for 4.2" Factory Display, Fits 2017-2022 Super Duty
Universal Front camera + 4.2" Ford® Integration
This kit contains a universal mount front camera with 4.2" Ford® radio integration module.
Can't see over that hood? This is your solution and is a Camera Source exclusive for your 2017+ Super Duty with the 4.2" MyFord® or 4.2" SYNC 3 display!! This CMOS license plate mounted camera kit will allow you to integrate front view safety to your truck. This camera can be converted to mount on any flat surface so you can place it and adjust to obtain an optimum view! All the cables are included and a 25'' long harness terminates with an RCA connection so you can integrate into the included dual camera interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off.
The screen interface provides front camera activation through steering wheel controls or can be manually triggered using a toggle or other triggering device (see below).
Kit is plug and play with factory wiring and does not require any dealer activation.
Kit includes:
- CMOS license plate mounted camera- with dual mounting bracket
- Screen interface module for your factory radio (radio not included). Provides multi-camera support for up to 2 total cameras including factory installed or aftermarket rear camera (rear cam not included)
- Mounting hardware
- Camera wiring harness
- Zip ties
- Detailed installation instructions
- 3 year limited camera warranty
Camera Specifications:
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Mirror/Non mirror selectable
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
MyFord® 4.2" Multi Cam interface:
- Uses existing 4.2” MyFord or 4.2" SYNC 3 factory display (screen not included)
- Allows addition of this front camera that can be manually triggered using your steering wheel controls.
- Pass through for existing factory backup camera
- Press and hold the SYNC Voice Command button to activate and the Volume Down button to exit.
This kit allows you to see what is directly in front of truck! This camera comes with a 3 year warranty and professional installation is recommended.
| SKU | CS-17FTRSD-42F |
|---|---|
| Video System | NTSC |
| Vehicle Interface | Includes Factory Integration Module |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | .1 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Selectable on/off |
| Camera Orientation | Front Facing |
| Fit Type | Universal fit |
| Connection | Plug and Play to Factory Dash Display |
| Sensor Type | Super CMOS |
| Viewing Angle | 170 Degrees |
| Camera Input Ports | 2 |
| Warranty | 3 Year |
| Camera Type | Front Camera |
| Vehicle Category | Truck |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Front Grille, Universal Mount |
| For a monitor it uses | Your factory display |
| Radio Screen Size | 4.2” Ford |
| Make | Ford |
| Model | Super Duty |
| Year | 2017,2018,2019,2020,2021,2022 |
| Make Filter | Ford |
| Model Filter | Super Duty |
| Year Filter | 2017, 2018, 2019, 2020, 2021, 2022 |
This kit is compatible with 2017-2022 Super Duty trucks with MyFord® 4.2" radio or 4.2" SYNC 3 radio.
Install on either your license plate mount or on any flat surface - comes with two brackets. The camera power harness gets run to the included multi-cam interface where all the power, ground, and video connections are made. The multi-camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install.
The instructions walk you through the entire installation process.
Q: How is the front camera activated?
A: This camera can be activated manually by pressing and holding the "OK" button for 3 seconds on either the radio controls or the steering wheel controls. A simple press of the OK button will exit the mode.
-Or it can be installed with a toggle switch to manually activate the camera at any time.
-Or you can configure the system for auto activation using our Curb Alert sensor system - camera automatically activates when an object is detected in front of the vehicle. See part number: 5CS-CAP (not included with this kit)
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount