Need Help? 888.844.9763

Front and Side Camera Kit for 7" IOB Display, Fits 2016-2018 GM®

Availabilty: In stock
SKU
CS-16GMTR-7FS
$545.00
 

Front & Side cams for 7" IOB display

This is a complete kit that contains our universal front camera, two side cameras, and a multi-cam integration module for your 7" factory IOB screen.

Compatible with 2016-2018 GM® trucks with factory 7" IOB radio.
 
This kit allows you to see what is directly in front of truck and both sides! This kit does not require any splicing into factory wiring. The multi-cam integration module allows for plug and play integration into your factory screen without having the dealer flash program your radio.  The factory rear camera will come on automatically when in reverse and front camera can be set to be triggered by speed or manually activated in settings on your factory screen. Factory rear camera not available above speeds of 7mph. The side cameras get installed under your side mirrors to give you a full view of your typical blind spots - all automatically activated using your turn signals! 

Because of the complexity of the side mirror disassembly professional installation is recommended.

Kit includes:

  • Multi-cam interface for your IOB 7" factory display (display not included)- plug and play and no dealer flashing required!
  • Universal front camera with harness and dual mount brackets
  • Two side cameras (mount under your side mirrors)
  • Mounting hardware
  • Camera wiring harnesses
  • Zip ties
  • Detailed installation instructions
  • 3 year warranty on the cameras

Camera Specifications:

  • CMOS forward looking camera - designed for front applications
  • Side cameras are designed for rear-view applications and can be fully adjusted to meet your view needs
  • 150 degree view
  • 500 TV lines of resolution
  • .2 lux minimum illumination - Outstanding night vision!

 

Multi Cam interface: 

  • Plug and play with your factory IOB display
  • Programs the radio to allow cameras to be shown on the factory display
  • Creates the RCA connection for a total of 4 cameras

*Additional cameras and display monitor are not included with this kit. This kit allows you to see what is directly in front of the truck as well as beside the truck! Cameras come with a 3 year warranty.  Professional installation is recommended.

 

 

 

More Information
SKUCS-16GMTR-7FS
Video SystemNTSC
Vehicle InterfaceIncludes Factory Integration Module
Waterproof/Dustproof LevelIP 67
Night Vision.2 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution500 TVL
Parking GuidelinesSelectable on/off
Camera OrientationFront or Rear Facing
ConnectionPlug and Play to Factory Dash Display
Sensor TypeCMOS III
Viewing Angle150 Degrees
Camera Input Ports4
Warranty3 Year
Camera TypeFront Camera, Side Camera, Multiple cameras (kit)
Vehicle CategoryTruck
Number of Cameras3
Reason for ShoppingAdding the camera(s)
Wiring TypeHard Wired
Camera Mount LocationSide Mirror, Front Grille
For a monitor it usesYour factory display
Radio Screen Size7" MyLInk/Intellilink
MakeChevrolet,GMC
ModelSilverado,Silverado HD,Sierra,Sierra HD,Colorado,Canyon
Year2016,2017,2018
Make FilterChevrolet, GMC
Model FilterCanyon, Colorado, Sierra, Sierra HD, Silverado, Silverado HD
Year Filter2016, 2017, 2018
2016-2018 Silverado, Sierra, Colorado, Canyon
IOB systems with a 7" screen

 

 

 

 

The side cameras will mount under your side mirrors, which will require complete removal and disassembly of your mirrors.  These mirrors can be challenging to disassemble so professional installation is recommended for this kit.

Front camera mounts to any flat surface and has parking guidelines that can be turned off.  You will need to switch it to the forward looking image on the harness during the installation.

The IOB multi-cam integration module is plug and play with your factory 7" IOB screen.  You will need to remove your factory 7" screen to gain access to the back of the connections. The module will be plug and play and stubs out an RCA for the cameras to connect directly to the screen.

 

 

 

 

 

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Q:  What is the thumbdrive used for?

A:  It is only used for future updates.  It is currently empty.

Q:  What is the HDMI port on the module used for?

A:  This is used for connecting your phone or other device to the module to have the device mirrored on your vehicle display.  You will need a separate HDMI cable that has the specific connector for your device on the other end.  

Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies