Ford Universal Front Camera and Force OEM Rear cam

In Stock
SKU:
7CS-ULPM-RU
$459.00
 
Ford Universal Front Camera and Force OEM Rear cam is available to buy in increments of 1

Add a front camera to your vehicle and force the factory rear camera at any speed!

Adding a front camera to select Ford 8" Factory Display Radios could never be simpler and more affordable!  - see application section for details.

This CMOS license plate mounted camera kit will allow you to integrate front view safety to your factory 8" display.  The camera can be converted to mount on any flat surface or simply mount to your license plate!  Both brackets are included. All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included factory display Interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off. 

Force Factory Rear camera: The included camera interface module also allows you to force your factory rear camera on at any speed.  Perfect for towing! 

View Front camera at any time: Perfect for parking!

Navigation unlock:  This interface module allows passenger access to the Navigation menu while vehicle is in motion.  Enter a destination address on the go!

Camera specifications:

  • Mini license bar universal mount camera
  • Super CMOS sensor for ultra clear display (the best available)
  • Resolution: 600 TV lines
  • Minimum Illumination: 0.2 Lux
  • View Angle: 170
  • Video Output: Full color video 
  • Working Voltage: DC 9-16V
  • Parking Line: On/Off selectable
  • Image: Forward facing
  • Water proof: IP67
  • 25 foot harness
  • 3 year warranty on the camera
Interface module features:
  • Front Camera composite video input.
  • Our video interface will also enable : Passenger access to Navigation menu while vehicle is in motion.
  • Force OEM Rear Camera at anytime (requires wire splicing).
  • Force Front Camera at anytime.
  • Video Interface is 100% Plug & Play, *OEM Rear camera forcing requires wire splicing.

12 volt Power source included.

No monitor is included with this kit as it is designed to work with your existing factory radio screen.  This camera comes with a 3 year warranty.  Professional installation is recommended.

More Information
SKU 7CS-ULPM-RU
Video System NTSC
Vehicle Interface Includes Factory Integration Module
Waterproof/Dustproof Level IP 67
Night Vision < .2 Lux
Power Supply 12 Volts
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Front Facing
Connection Plug and Play to Factory Dash Display
Sensor Type Super CMOS
Sensor Brand EVI Systems
Viewing Angle 170 Degrees
Camera Input Ports 1
Warranty 3 Year
Number of Cameras 1
Reason for Shopping Adding the camera(s)
Wiring Type Hard Wired
For a monitor it uses: Your factory display
Make Ford
Model F-150,Edge,Super Duty,Explorer,Expedition
Year 2016,2017,2018,2019,2020

Vehicle must have a factory installed back up camera and an 8" factory SYNC 3 radio display 

  • 2016-2020 F-150 
  • 2017-2020 F250,F350, F450, F550
  • 2017-2020 Explorer
  • 2016-2020 Expedition

This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep. 

Camera installs on either your license plate mount or on any flat surface - comes with two brackets. The camera power and ground harness gets run to the included power module that connects to the battery.

The camera interface is plug and play with your factory radio wiring and does not require any dealer programming.  It does require you to remove the radio in order to install.  OEM Rear camera forcing requires wire splicing. Detailed instructions included.

Plug the camera RCA into the RCA input on the interface module. 

Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account