Toyota Universal Front Camera and Force OEM Rear cam
Add a front camera to your vehicle and force the factory rear camera at any speed!
Adding a front camera to select Toyota vehicle Factory Display Radios could never be simpler and more affordable! - see application section for details.
This CMOS license plate mounted camera kit will allow you to integrate front view safety to your factory LCD display. The camera can be converted to mount on any flat surface or simply mount to your license plate! Both brackets are included. All the cables are included and the 25' long harness terminates with an RCA connection so you can integrate into the included factory display Interface. The camera has adjustable tilt and comes with parking guideline options, meaning that the guidelines can be turned off.
The included camera interface module also allows you to force your factory rear camera on at any speed. Perfect for towing!
- Mini license bar universal mount camera
- Super CMOS sensor for ultra clear display (the best available)
- Resolution: 600 TV lines
- Minimum Illumination: 0.2 Lux
- View Angle: 170
- Video Output: Full color video
- Working Voltage: DC 9-16V
- Parking Line: On/Off selectable
- Image: Forward facing
- Water proof: IP67
- 25 foot harness
- 3 year warranty on the camera
- 1 Front camera input add front facing camera (with auto trigger after reverse up to 7 seconds).
- Option to force factory rear camera at any speed in Drive gear. Momentary button included.
No monitor is included with this kit as it is designed to work with your existing factory radio screen. This camera comes with a 3 year warranty. Professional installation is recommended.
|Vehicle Interface||Includes Factory Integration Module|
|Waterproof/Dustproof Level||IP 67|
|Night Vision||< .2 Lux|
|Power Supply||12 Volts|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Camera Orientation||Front Facing|
|Connection||Plug and Play to Factory Dash Display|
|Sensor Type||Super CMOS|
|Sensor Brand||EVI Systems|
|Viewing Angle||170 Degrees|
|Camera Input Ports||1|
|Number of Cameras||1|
|Reason for Shopping||Adding the camera(s)|
|Wiring Type||Hard Wired|
|Camera Mount Location||Front Grille|
|For a monitor it uses:||Your factory display|
|Radio Screen Size||Factory LCD|
Vehicle must have a factory LCD radio display and factory installed back up camera.
- 2014-2017 Camry
- 2014-2019 Highlander
- 2016-2019 Tacoma
- 2015-2018 Avalon
- 2015-2017 Sienna
- 2014-2018 RAV 4
- 2014-2017 Venza
- 2014-2019 Tundra
This camera kit will fit any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5 inches wide by .75 inches deep.
Camera installs on either your license plate mount or on any flat surface - comes with two brackets. The camera power and ground harness gets run to the included power module.
The camera interface is plug and play with your factory radio wiring and does not require any dealer programming. It does require you to remove the radio in order to install.
Plug the camera RCA into the RCA input on the interface module.