Need Help? 888.844.9763

Backup Camera for Factory Display Fits 2013-2017 Dodge® Ram

Availabilty: In stock
SKU
CS-13DTR-OBD
Special Price $412.00 Regular Price $464.00
 

Uses your factory display!

This kit is for a 2013-2017 Ram trucks that have the factory installed 4.3", 5", or 8.4" display screen.  NO DEALER PROGRAMMING REQUIRED!  NOTE: THE NAVIGATION SCREEN IN THE PHOTO IS NOT INCLUDED.

 

Premium camera kit- camera will also allow you to see the rear bumper and trailer hitch for easy connections - even at night!

 

This OE style camera provides superior high definition color, clarity, and excellent night vision! This camera contains our latest Super CMOS technology that even outperforms the factory camera in all categories! Coupled to a OEM Dodge® tailgate handle, this combination will look like it was installed at the factory. When you put your truck in reverse the camera will turn on your factory radio display and show you a crystal clear picture of what is behind you! This kit comes with all the wiring and connectors to install into your truck and connect to your factory 4.3", 5", or 8.4" screen.  FACTORY NAVIGATION/RADIO SCREEN IS NOT INCLUDED you must have the 4.3", 5", or 8.4 display mentioned above.

 

This package contains:

  • Premium Super CMOS night vision camera with optional display guidelines, mounted in OEM Dodge® tailgate handle. This is our latest image sensor and has a super wide view and crisp clear picture!
  • 25' pre-loomed wiring harness - allows for quick tailgate disconnect with a single connection by the spare tire area. All other electrical connections will be made inside the cab for maximum durability and corrosion avoidance!
  • Factory radio screen T-harness 
  • OBD programmer- No dealer activation required!
  • Selectable OE inspired parking guidelines
  • Wire connectors
  • Detailed installation instructions
  • 3-Year limited camera warranty!
  • Factory navigation screen NOT included.  NO MONITOR IS INCLUDED IN THIS KIT.

Camera Specifications:

  • Camera Source Super CMOS
  • 170 degree view
  • 600 TV lines of resolution
  • .1LUX minimum illumination
  • IP67 rating

Additional Information: This MOPAR® tailgate handle replaces your existing handle as a direct replacement kit. This kit is designed for trucks with factory display screen in the radio.

More Information
SKUCS-13DTR-OBD
Video SystemNTSC
Waterproof/Dustproof LevelIP 67
Night Vision.1 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution600 TVL
Parking GuidelinesSelectable on/off
Camera OrientationRear Facing
ConnectionPlug and Play to Factory Dash Display
Sensor TypeSuper CMOS
Viewing Angle170 Degrees
Camera Input Ports1
Warranty3 Year
Camera TypeRear Camera
Vehicle CategoryTruck
Number of Cameras1
Reason for ShoppingAdding the camera(s)
Wiring TypeHard Wired
Camera Mount LocationFactory Tailgate
For a monitor it usesYour factory display
Radio Screen Size4.3" Mopar, 5" Mopar, 8.4" Mopar
MakeRAM
Model1500,HD
Year2013,2014,2015,2016,2017
Make FilterRam
Model Filter1500, HD
Year Filter2013, 2014, 2015, 2016, 2017

All 2013-2017 Dodge® Ram trucks with factory 4.3", 5", or 8.4" radio display.

Professional installation is recommended. Remove the radio and install the radio T-harness. Then remove the old tailgate handle and replace with the one from this kit, fishing the camera wire through the existing holes in the bottom of the tailgate and bed. The harness is over 25' long and will easily get you into the cab through an existing rubber grommet in the firewall by the gas pedal area. Connect the camera wiring to the radio T-harness and vehicle wiring system.  

Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related item SKU: CS-RPW-P

Total installation time is between 1.5 hours and 2.5 hours depending on skill level.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Q:  Can the OBD programmer be used more than once?

A:  No, the programmer is VIN locked after one use and once the seal is broken, the programmer can't be returned.  After you've programmed your factory radio it is recommended that you store the programmer in the glovebox just in case programming is ever lost due to vehicle servicing, etc.  
Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies