Skip to the beginning of the images gallery

Commercial Second Cam Option for Sierra/Silverado Factory Display

Availabilty: In stock

SKU

CS-UTC-SWGM

Be the first to review this product

$325.00

Toggle between cameras!

Description

This kit includes a harness that will allow you to use your factory radio display and toggle between your factory installed back up camera and this commercial camera when in reverse. The camera connects to a video switcher harness that connects to the same connector on the back of your factory display that your factory rear camera uses.

This kit comes in handy when you have a trailer behind the truck since the rear of the trailer is a serious blind spot! This kit is designed to solve that problem by adding the second rear camera on the rear of the truck or trailer. This camera has built in LED's for better night vision. Comes with everything you need to install the camera on the rear of the trailer and run a 4 pin coax to the cab to connect to the video switcher. Optional trailer quick disconnect system allowing you to disconnect your trailer with ease by making the camera connections as simple as unplugging the lights of the trailer.

The included video switcher harness allows you to choose which camera you want to display when in reverse by flipping a switch.

Notes about the included integration cable:

Truck must have a rear view camera that was installed at the factory and is displayed on your factory IO4, IO5, or IO6 radio screen (2014-2018 models only)
Kit includes a video switcher harness that allows you to connect both your factory tailgate camera and this commercial camera to your factory radio. The switch allows you to choose which one is displayed in reverse.

Kit includes:

Commercial grade night vision camera with 700 TV lines of resolution Sony CCD sensor (CS-UCCD-SONY)
Camera special design allows it to be used with North American factory navigation units
64' length 4 pin coaxial weather proof cable (CS-UC20)
4 pin male to RCA conversion harness so that you can connect to the video switcher
All connections are weather tight except those made inside the cab!
Integration harness with toggle switch for GM IO4, IO5, IO6 display. Not compatible with IOB display.
OPTIONAL-Trailer quick disconnect system for easy camera connections - weather tight! (CS-UTQC)
Install instructions
1 Year warranty

Camera Specifications:

1/3" Sony CCD for the highest clarity available
700 TV lines of resolution
150 degree field of view
IR LED's for clear night vision even in complete blackness
Weather grommet for easy cable passage to the interior
Aluminum alloy weather tight casing with IP68 water resistance
Weather tight screw connectors for extremely secure and dry connections
1 Year Warranty

**Display not included** This kit connects to your existing factory display. Not compatible with IOB display.

Specifications

More Information
SKU	CS-UTC-SWGM
Vehicle Interface	Not Included
Waterproof/Dustproof Level	IP67
Night Vision	< .2 Lux
Power Supply	12 Volts
System Manufacturer	EVI Systems
Camera Resolution	700 TVL
Camera Orientation	Rear Facing
Fit Type	Universal fit
Connection	RCA with opt. Factory Interface
Sensor Type	CCD
Sensor Brand	EVI Systems
Viewing Angle	150 Degrees
Warranty	3 Year
Camera Type	Rear Camera, Utility Bed Camera Systems, Trailer/Camper/5th Wheel camera
Vehicle Category	Truck, Camper/Trailer (if connecting to vehicle wiring)
Reason for Shopping	Adding the camera(s)
Wiring Type	Hard Wired
Camera Mount Location	Camper/Utility Bed, Universal Mount
For a monitor it uses	Your factory display
Radio Screen Size	4.2" MyLink, 8" MyLInk/Intellilink
Make	GMC,Chevrolet
Model	Sierra,Sierra HD,Silverado,Silverado HD
Year	2014,2015,2016,2017,2018
Make Filter	Chevrolet, GMC
Model Filter	Sierra, Sierra HD, Silverado, Silverado HD
Year Filter	2014, 2015, 2016, 2017, 2018

Compatibility

2014-2018 Sierra or Silverado with iO4, iO5, or iO6 factory radio. To confirm radio type, locate the Service Parts Identification sticker in your glove box. Look for code IO4, IO5, or IO6 on this glove box sticker to confirm compatibility. See images for example.

Will not work with 7" IOB screen.

Installation

Remove the radio to gain access to the camera connector. Install video switcher harness.

Camera installs virtually anywhere on the trailer. Then route the camera cable along the bottom of the trailer securing with zip ties along the way. Connect to the quick disconnect system at the tongue of the trailer. Install truck portion of the disconnect system to the truck and route the cable to the cab of the vehicle to the back of your factory display. Plug the RCA connector from the camera harness into the T-harness. Locate a reverse activated or accessory 12v power source and clean piece of metal for grounding. Power connections for camera must be made inside the cab.

Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Question & Answers

Q: What are the camera dimensions? (with bracket)

A: 3" L x 2 1/2" W x 3" H

Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.