Premium Backup Camera Kit, Fits 2007-2014 Tahoe, Suburban, Yukon, SUV
OEM look, high grade sensor!
Premium camera kit- camera will also allow you to see the rear bumper and trailer hitch for easy connections - even at night! NO MONITOR IS INCLUDED IN THIS KIT.
This OE style camera provides superior high definition color, clarity, and excellent night vision! This camera contains the latest technology that even outperforms the factory camera in all categories! This camera system looks like a factory camera, but at a much lower price. This kit comes with all the wiring and connectors to install into your SUV. *Kit harness terminates with RCA so if you intend to connect to factory navigation you will also need to order an interface harness as described below.
This package contains:
- Premium high definition Super CMOS camera - (Camera Source exclusive)
- 25' wiring harness
- Wire connectors
- Hole grommets
- Detailed installation instructions
- 3-Year limited camera warranty! This is the best warranty available on any GM camera system on the market.
- MONITOR NOT INCLUDED
Camera Specs:
- Super CMOS - The best available and only at Camera Source
- 600 TV lines of resolution
- 170 degree view
- Optional custom OE inspired parking guidelines - can be turned off at the harness
Additional Information: This camera mounts under the lift gate license plate panel in the same place that the factory camera would be mounted.
Interface harnesses:
CS-GMVSS1 - Needed to integrate into factory navigation radio if navi was factory installed (2007-2011 models)
CS-GMVSS2 - Needed to integrate into factory navigation radio if an OEM navi was added later (includes brown plug for 2007-2011)
CS-GMVSS3 - Integrate into factory navigation for 2012 -2013 models
**Not a replacement for a burned out factory camera.
SKU | CS-GMSUVb |
---|---|
Video System | NTSC |
Vehicle Interface | Not Included |
Waterproof/Dustproof Level | IP 67 |
Night Vision | < .2 Lux |
Power Supply | 12 Volts |
System Manufacturer | EVI Systems |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Connection | RCA with opt. Factory Interface |
Sensor Type | Super CMOS |
Viewing Angle | 170 Degrees |
Warranty | 3 Year |
Camera Type | Rear Camera |
Vehicle Category | Truck |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Undermount/Lip Mount |
For a monitor it uses | Your aftermarket display (RCA) |
Make | GMC,Chevrolet |
Model | Yukon,Suburban,Tahoe |
Year | 2007,2008,2009,2010,2011,2012,2013,2014,2015 |
Make Filter | Chevrolet, GMC |
Model Filter | Suburban, Tahoe, Yukon |
Year Filter | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 |
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 (w/aftermarket radio), 2015 (w/aftermarket radio) GM® NBS full size SUV to include: GMC® Yukon, Denali Chevrolet® Tahoe, Suburban
NOTE: The interface devices mentioned above will not work on Intellilink/MyLink systems. If you have a 2014 or newer with either of those two radios you will need kit CS-GMSUV-LNK.
**Not a replacement for a burned out factory camera.
This camera will install in the bezel above the license plate. This camera will connect to your factory navigation, aftermarket navigation, factory video mirror, or any other monitor with an RCA input. If you are connecting to your factory navigation you will need to have your nav radio flashed by your local GM® dealer, which usually costs between $50-$100. To flash the navigation they need to connect their Tech II flashing tool and program part #2583-6479 to the radio, which will allow the navigation screen to switch to the backup camera display when in reverse. NOTE: THIS CAMERA CAN NOT INTERFACE THE NEW HARD DRIVE NAVIGATION SYSTEM IN 2012-2013. It will work with any non-hard drive navigation system in 2007-early 2012.
For factory navigation you will also need an interface device: CS-GMVSS is a $20 female RCA adaptor that get's plugged in to the factory VSS connector on the back of the navigation radio. This is the least expensive method for interfacing with the navigation unit.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P
Watch a video of the factory navigation flashing process:
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount