Need Help? 888.844.9763

Universal backup camera with OBD Programmer for Factory Display, Fits Select Chrysler®/Dodge®/Jeep®

Availabilty: In stock
SKU
CS-ULPM-C2TG
$322.00
 

No dealer programming required!

This is a high quality OEM integrated backup camera solution for several Chrysler®/Dodge®/Jeep® vehicles that integrates right into your 8" factory display screen! No dealer programming is required making this a simple OEM integrated solution for your vehicle  The camera can be mounted on the license plate or it also comes with a mini mount that will allow you to mount the camera to the ledge above the license plate if you choose.

**Important-Double check compatibility tab for your specific make, model, and year to confirm compatibility**

The kit comes with the following:

  • Dual mount camera system with high grade Super CMOS sensor for an ultra clear view, mount on license plate or lip mount as desired
  • Full chassis harness
  • Factory radio integration harness (Monitor not included)
  • OBD programming module
  • Required mounting hardware/connectors

Camera Specifications:

  • Camera Source exclusive Super CMOS high grade sensor with night vision
  • Selectable parking guidelines (can be turned off during install if desired)  NOTE: Black center line is not present on actual display
  • 600 TV lines of resolution
  • <.2 lux minimum illumination - Outstanding night vision!
  • 170 degree viewing angle

System has a 3 year warranty!

**Monitor not included.**

More Information
SKUCS-ULPM-C2TG
Video SystemNTSC
Vehicle InterfaceIncludes Factory Integration Module
Waterproof/Dustproof LevelIP 68 Camera
Night Vision.3 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution600 TVL
Parking GuidelinesSelectable on/off
Camera OrientationRear Facing
Fit TypeUniversal fit
ConnectionPlug and Play to Factory Dash Display
Sensor TypeCMOS III
Viewing Angle170 Degrees
Warranty3 Year
Camera TypeRear Camera
Vehicle CategoryCar, Truck
Number of Cameras1
Reason for ShoppingAdding the camera(s)
Wiring TypeHard Wired
Camera Mount LocationUniversal Mount
For a monitor it usesYour factory display
Radio Screen Size8.4" Mopar
MakeDodge,Chrysler,Jeep
Model200,300,Aspen,Sebring,Town&Country,Avenger,Caliber,Challenger,Charger,Dakota,Durango,GrandCherokee,Journey,Magnum,Nitro,CitiVan,Commander,Compass,GrandCherokee,Patriot,Liberty,Wrangler
Year2007,2008,2009,2010,2011.2012.2013.2014, 2015, 2016,2017
Make FilterChrysler, Dodge, Jeep
Model Filter200, 300, Aspen, Avenger, Caliber, Challenger, Charger, CitiVan, Commander, Compass, Dakota, Durango, Journey, Liberty, Magnum, Nitro, Patriot, Sebring, Wrangler
Year Filter2007, 2008, 2009, 2010, 2015, 2016, 2017

Compatible with the listed vehicles that have the REC,RER, MyGig, RA3, RA4 8" factory display screen without "hands free" bluetooth system.

Not compatible with 4.3" screen.

Chrysler 200 2011-2014
  300 2008-2011
  Aspen 2008-2009
  Sebring 2007-2010
  Town&Country 2008-2016
Dodge Avenger 2007-2014
  Caliber 2009-2012
  Challenger 2008-2014
  Charger 2008-2010
  Dakota 2008-2011
  Durango 2008-2013
  Grand Caravan 2008-2018
  Journey 2008-2010
  CitiVan 2012-2016
Jeep Commander 2008-2011
  Compass 2009-2018
  Grand Cherokee 2008-2013
  Patriot 2009-2018
  Liberty 2008-2012
  Wrangler 2007-2018

Install on either your license plate mount or on any flat surface - comes with two brackets. The camera harness will run inside the vehicle to the back of your factory display and you will need to locate a reverse activated 12v power source and ground. 

Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related item SKU: CS-RPW-P

You will need to remove your factory radio to install the RCA T-Harness to the back of your factory display. Connect the RCA from the main chassis harness to the T-Harness.

Plug the OBD programmer into the OBD port under the steering wheel and programming is completed in less than a minute!

 

NO DEALER ACTIVATION REQUIRED

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Q:  Where does this camera mount?

A:  Install on either your license plate mount or on any flat surface - comes with two brackets.

Q:  Will this work with my 4.3" factory display?

A: The vehicle must have a factory radio screen- MyGig,REC, 5.2" or 8.4" U-Connect radio

Q:  Can the OBD programmer be used on more than one vehicle?
A:  No, the programmer is VIN locked to your vehicle after one use. Once the seal on the programmer has been broken, it can't be returned.  After you've programmed your factory radio it is recommended that you store the programmer in the glovebox just in case programming is ever lost due to vehicle servicing, etc.  
Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies