10-13(14) Sierra, Silverado, HD Replacement Camera
Did you get your tailgate stolen? Did your factory backup camera burn out? Do you have a factory camera but want parking guidelines in the display? If so, this is the kit for you!
This is the only aftermarket backup camera replacement module kit for your 2010-2013 (+2014 heavy duty models) GM truck! We developed this kit so that you can easily replace that faulty camera with this plug and play kit - without spending a fortune on a GM replacement module. Since your bezel is likely faded or missing we also include a new factory GM tailgate bezel with the camera pre-mounted. All connections are plug and play and will work with your factory navigation or mirror display.
- Camera Source Super CMOS camera module - this is the best camera you can buy for your truck and is only available from Camera Source
- Plug and play wiring harness for your 2010-2013 GM truck with a double camera connector - kit does not include the chassis harness
- Plastic snap bushings for camera cable passage openings
- Super CMOS (developed by Camera Source) has our custom program so we control the quality of the image
- Selectable OEM style parking guidelines. We incorporated these guidelines into our custom program - inspired by what all the major auto makers use for a guideline design. You can also turn them off by cutting a small wire on the harness
- 600 TV lines of resolution - better than the factory original camera!
- .2 lux for low light conditions
- 170 degree view and a higher vertical space to incorporate objects in the distance into the field of view
- 3 year warranty
Don't spend big dollars at your GM dealer when you can have this quality replacement camera kit instead!
|Waterproof/Dustproof Level||IP 67|
|Night Vision||.2 Lux|
|Power Supply||12 Volts|
|System Manufacturer||EVI Systems|
|Camera Resolution||600 TVL|
|Parking Guidelines||Selectable on/off|
|Camera Orientation||Rear Facing|
|Fit Type||Factory OE Fit Replacement|
|Sensor Type||Super CMOS|
|Viewing Angle||170 Degrees|
|Reason for Shopping||Factory camera failed/need replacement|
|Wiring Type||Factory Plug&Play|
|Camera Mount Location||Factory Tailgate|
|For a monitor it uses:||Your factory display|
|Model||Sierra,Sierra HD,Silverado,Silverado HD|
2010-2013 GM trucks with the double black plug at the rear for the camera connection, also up to 2014 HD models. This includes Chevy Silverado all models, GMC Sierra all models, and HD trucks. If your truck did not come from the factory with a backup camera then this kit will not work for you. Please see our other kit part number CS-GMTR for a complete kit that includes the full length chassis harness.
Replaces the factory original rear camera and optional tailgate handle bezel. Connector will plug right into your factory connection and the job is done!
NOTE: The factory camera has two rubber grommets that are not included in this kit. You can either swap them over to the new camera harness or simply use the included plastic snap bushings to protect the harness from the sharp metal edge of the removed grommet. The key is to keep the loom sliding loosely through both openings if the grommets are not used.