Rear View Back Up Camera - Complete Kit, Fits 2010-2018 Camaro
Includes OnStar® video mirror!
See what you've been missing with this complete rear view backup camera and 4.3" LCD display rear view mirror for your Chevy® Camaro.
This rear view backup camera system includes a replacement OnStar® rear view mirror for your Camaro with no loss of vehicle features, Super CMOS camera, and all vehicle harnessing. When you put your Camaro in reverse, the replacement rear view mirror displays a bright 4.3" LCD that provides a complete view of everything behind your vehicle, with our Camera Source exclusive camera. This kit can be installed in 90 - 150 minutes by a professional. A "do-it-yourself" installation is estimated between 120-180 minutes. Professional installation is recommended.
This package contains:
- Premium high definition Super CMOS camera - (Camera Source exclusive)
- 25' wiring harness
- Wire connectors
- Hole grommets
- OnStar® auto dimming video mirror with 4.3" video screen
- Detailed installation instructions
- 3-Year limited camera warranty and 1-Year mirror warranty
Camera Specs:
- Super CMOS - The best available and only at Camera Source
- 600 TV lines of resolution
- 170 degree view
- Optional custom OE inspired parking guidelines - can be turned off at the harness
Additional Information: This camera mounts under the lift gate license plate panel in the same place that the factory camera would be mounted.
Key Benefits:
- No loss of features in your current mirror or vehicle
- Auto dimming mirror
- Large 4.3 color backup monitor displays vividly when you put your Camaro in reverse
- One year warranty on mirror and 3 year warranty on camera.
SKU | CS-GMCAM-356 |
---|---|
Video System | NTSC |
Vehicle Interface | Includes Rearview Mirror |
Waterproof/Dustproof Level | IP 67 |
Night Vision | .3 Lux |
Power Supply | 12 Volts |
System Manufacturer | Camera Source |
Camera Resolution | 600 TVL |
Parking Guidelines | Selectable on/off |
Camera Orientation | Rear Facing |
Connection | Rearview Mirror |
Sensor Type | Super CMOS |
Sensor Brand | EVI Systems |
Viewing Angle | 170 Degrees |
Camera Input Ports | 1 |
Warranty | 1 Year |
Mirror Options | Auto Dim, Video, OnStar |
Mirror Mount | Wedge Style |
Camera Type | Rear Camera |
Vehicle Category | Car |
Number of Cameras | 1 |
Reason for Shopping | Adding the camera(s) |
Wiring Type | Hard Wired |
Camera Mount Location | Undermount/Lip Mount |
For a monitor it uses | Packaged w/Rear view mirror display |
Monitor Size | 4.3'' Mirror |
Make | Chevrolet |
Model | Camaro |
Year | 2010,2011,2012,2013,2014,2015,2016,2017,2018 |
Make Filter | Chevrolet |
Model Filter | Camaro |
Year Filter | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
**Limited fit in Convertible Camaro** Due to the convertibles increased overhead console size the 4.3" display mirror in this kit has compromised adjustability. Please install mirror and check for rearward visibility before full kit installation on convertible models.
This kit is for use in a 2010-2018 Chevrolet® Camaro.
Installation is estimated between 90-150 minutes. A "do-it-yourself" installation is estimated between 120-180 minutes. Professional installation is recommended.
You will install the camera in the panel above the license plate and replace your factory mirror with this replacement. The mirror comes with the necessary harness to retain the OnStar® feature and power/video harness to connect to the factory wiring and camera wiring.
You will need to locate a 12 volt accessory power source, reverse power source, and ground for installing the camera and mirror.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount