Premium OE Fit 3rd Brake Light Camera w 5" Monitor, Fits 2007-2018 Sprinter®
Includes 5" Monitor
Not all Sprinter® cameras are the same as this kit provides the ultimate in clarity by using a next generation HD CMOS image sensor with 700 TV lines of resolution! We take the OE third brake light housing camera mold and couple it with our proprietary camera sensor to create a kit that will give you the best view of behind your Sprinter that is possible, day or night! This kit comes complete with a 5" digital monitor that can be mounted on your dash for a quick and easy install!
This kit contains the following:
- Sprinter® OE fit third brake light assembly with high grade camera preloaded
- 5" Digital monitor with remote
- 16' Coaxial cable
- 4 pin to RCA conversion pigtail
- Power wire with fuse holde
- Installation instructions
- 3 year limited replacement warranty
Camera Specifications:
- 700 TVL resolution
- 170 degree view
- IP 68 weather/dustproof
- IR LED's for clearer night vision, even in complete darkness
- Optional parking guidelines
- Rotatable camera housing
Monitor Specifications:
- screen size: 5 inch (diagonal length)
- 16:9 wide screen display
- 3 way video /2 audio inputs
- PAL & NTSC auto switching
- Power supply: DC 12V-24V compatible
- Built in speakers
- Remote control
- OSD menu
- 4 PIN connector input and 1 RCA A/V connector input (both are included)
Simply replace your third brake light with this assembly, route the harness to the cab and connect to power supply to the included monitor. Very simple to install, completely adjustable, and will provide that extra margin of safety that will save you money in the long run! Mount the monitor on the dash using the included steel u-bracket.
| SKU | CS-SPRNT-5 |
|---|---|
| Video System | NTSC |
| Vehicle Interface | Not Included |
| Waterproof/Dustproof Level | IP68 |
| Night Vision | 0 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 700 TVL |
| Parking Guidelines | Selectable on/off |
| Camera Orientation | Rear Facing |
| Connection | Aftermarket Display (RCA) |
| Sensor Type | Super CMOS |
| Viewing Angle | 170 Degrees |
| Warranty | 3 Year |
| Camera Type | Rear Camera, Cargo/3rd Brake Light camera |
| Vehicle Category | Fleet Vehicle (i.e. cargo van) |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Factory 3rd Brake Light |
| For a monitor it uses | Packaged w/Aftermarket Monitor |
| Monitor Size | 5" |
| Make | Mercedes |
| Model | Sprinter |
| Year | 2007,2008,2009,2010,2011,2012,2013,2014,2015, 2016,2017,2018 |
| Make Filter | Mercedes |
| Model Filter | Sprinter |
| Year Filter | 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
2007-2018 Sprinter® vans
Remove the third brake light lens and replace with this camera assembly. Route the harness to the cab and connect power to 12v reverse activated power or ignition, black to ground, and video RCA to monitor display. The monitor requires 12 volt accessory power and ground then all the camera connections will be made to the monitor directly. In this configuration the monitor and camera can be on at any time. You can also connect the monitor trigger wire to a 12v reverse power source and the monitor will come on only when in reverse.
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring! See related item SKU: CS-RPW-P
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount