Backup Cam w/ OnStar® Mirror, Temp and Compass, Fits 99-07 (classic) Silverado, Sierra
OEM style solution for your classic truck!
Premium camera kit that includes OnStar® mirror with compass and temp in the upper right corner and 4.3" video monitor! Camera will also allow you to see the rear bumper and trailer hitch for easy connections - even at night!
Finally a backup camera kit for your classic body style Chevy® or GMC® pickup truck! We take a high quality camera and couple it to a custom bracket for a simple bolt on solution. This kit comes with everything you need as a complete kit!
This package contains:
- Premium night vision camera, mounted in a custom bracket for a simple bolt on solution.
- 25' pre-loomed wiring harness - allows for quick tailgate disconnect with a single connection by the spare tire area. All other electrical connections can be made inside the cab for maximum durability and corrosion avoidance!
- Wire connectors
- 1" plastic snap bushings - for cable passage in the bottom of the tailgate and back of the box
- Detailed installation instructions
- 3-Year camera warranty!
This kit also contains a replacement OnStar® mirror:
- A replacement for your vehicle's factory original mirror
- Includes compass/temperature display in upper right corner of mirror
- No loss of features in your current auto-dimming mirror with OnStar® buttons
- Large 4.3 color backup monitor displays vividly when you put your car in reverse
- Compatible with all standard backup cameras through the included installation harness
- Includes harness with RCA input
- Includes temperature sensor probe and harness
- Installation requires locating power and ground on vehicle for new mirror
- Increased vehicle resale value
- One year warranty
Additional Information: This assembly and camera will mount inside your existing tailgate handle bezel. The mirror will replace your factory mirror - all the wiring is included! This is a great way to add the safety and convenience of a backup camera!
| SKU | CS-GMTRCL-356T |
|---|---|
| Video System | NTSC |
| Vehicle Interface | Includes Rearview Mirror |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | < .2 Lux |
| Power Supply | 12 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 600 TVL |
| Parking Guidelines | Selectable on/off |
| Camera Orientation | Rear Facing |
| Connection | Rearview Mirror |
| Sensor Type | Super CMOS |
| Viewing Angle | 170 Degrees |
| Camera Input Ports | 1 |
| Warranty | 3 Year |
| Mirror Options | Auto Dim, Video, OnStar, Compass, Temp Display |
| Mirror Mount | Wedge Style |
| Camera Type | Rear Camera |
| Vehicle Category | Truck |
| Number of Cameras | 1 |
| Reason for Shopping | Adding the camera(s) |
| Wiring Type | Hard Wired |
| Camera Mount Location | Factory Tailgate |
| For a monitor it uses | Packaged w/Rear view mirror display |
| Monitor Size | 4.3" |
| Make | Chevrolet,GMC |
| Model | Sierra,Sierra HD,Silverado,Silverado HD |
| Year | 1999,2000,2001,2002,2003,2004,2005,2006,2007 |
| Make Filter | Chevrolet, GMC |
| Model Filter | Sierra, Sierra HD, Silverado, Silverado HD |
| Year Filter | 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 |
1999-2007 (classic body style) GMC® Sierra, Chevy® Silverado pickup trucks with factory equipped OnStar®.
MIRROR NOTES: Though this mirror has the OnStar® buttons on it, it will not add OnStar® to any vehicle unless it came equipped with that feature from the factory. Existing mirror must not have passenger airbag indicator light. If you have a passenger airbag light in your mirror this kit is not recommended. If your vehicle has a factory temperature sensor it will need to be replaced with the included sensor.
Bracket assembly will bolt into your existing tailgate handle. You will be required to drill two 1" holes; one in the bottom of the tailgate and the other in the back of the bed for cable passage (drill bit is not included). Wiring is long enough to get you into the cab on all vehicles so all connections can be made to the interior junction block for maximum corrosion avoidance.
You will need to locate a 12 volt accessory power source, reverse power source, and ground for installing the camera and mirror.
Mirror will replace your factory OnStar® mirror with no loss of functionality. Harness is included for temp probe and video for the camera connection.
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
Related Products
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount