Auto Trailer Camera Switcher for Ford F-150

In Stock
SKU:
CS-FTR-AT
$324.00
 
Auto Trailer Camera Switcher for Ford F-150 is available to buy in increments of 1

Finally!  An easy way to add a reverse camera to any trailer and have it automatically displayed on your factory display screen when connected.  Plug and play with your factory wiring!  Automatically detects when the trailer camera is plugged in and switches from the tailgate camera view to the trailer camera view.

This simple switcher box is plug and play with your factory camera wiring at the back of the truck.  Mount your camera and cabling on the trailer and plug into the T-harness on the switcher box and you’re all set.  No complex installation behind the dash.  Everything is easily accessible under the tailgate at the back of the truck. No cutting or splicing!

When you want to disconnect the trailer simply unplug the trailer camera and the camera view automatically switches back to the factory tailgate camera.  Cover the disconnected cables with the included dust caps for protection.

 

Kit includes the following:

  • Heavy duty commercial camera with Sony CCD sensor, customized to work with your factory display radio for the clearest picture available
  • Auto Trailer switcher box with OEM to commercial coax conversion harness-plug and play! (Pat. No: 9154746, 9882319)
  • OEM conversion harness has factory ends for plug and play with your existing wiring.
  • 32' coaxial wire harness with weather tight connectors (unless other option selected above)
  • One year warranty!

Camera Specifications:

  • Sony Ultra CCD for a super clear image
  • Infra-red LED's that will create a daytime like display even in complete darkness
  • 150 degree view
  • 700 TV lines of resolution
  • 0 lux (no light required to operate)
  • Heavy cast casing and steel mounting bracket
  • Locking weather tight connector

 

**Not compatible with trucks that have the 360 degree view system**  See our other kit options. NOTE: Ford trucks equipped with the ‘Pro Trailer Back-Up Assist’ system will not function with this kit installed.

 

More Information
SKU CS-FTR-AT
Video System NTSC
Waterproof/Dustproof Level IP 68 Camera
Night Vision 0 Lux
Power Supply 12 Volts
System Manufacturer EVI Systems
Camera Resolution 700 TVL
Parking Guidelines Not Available
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type CCD
Sensor Brand Sony
Viewing Angle 150 Degrees
Warranty 1 Year
Camera Type Rear Camera, Trailer/Camper/5th Wheel camera
Vehicle Category Truck, Camper/Trailer (if connecting to vehicle wiring)
Number of Cameras 1
Reason for Shopping Adding the camera(s)
Wiring Type Factory Plug&Play
Camera Mount Location Camper/Utility Bed, Universal Mount
For a monitor it uses Your factory display
Radio Screen Size Factory LCD
Make Ford
Model F-150
Year 2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021

Ford F150 series truck with a factory installed backup camera. This kit relies on the factory camera chassis harness to operate.  Currently not compatible with 2015+ manual lowering tailgate option. 

F-150: 2008-2021

NOTE: Compatible with 2021 F150 XL with 100A package only. See our other kits for compatibility with other trim levels.

**If your F150 has an automatic lowering tailgate that can be activated with your key fob, be sure to select the Automatic Lowering Tailgate option when ordering.  The connector for the camera is different for trucks with this option.  Note:  The automatic lowering and power locking tailgate feature is disabled when using this kit.  

Ford trucks equipped with the ‘Pro Trailer Back-Up Assist’ system will not function with this kit installed.  

 

 

 

 

 

 

 

 

 

Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required!
Power is run to the camera through the coaxial cable so it is not necessary to locate power on the trailer or area where the camera is mounted.

Auto switcher box plugs directly into the factory camera connection located under the truck, behind the rear bumper. 

No complex installation behind the dash. Everything is easily accessible under the tailgate at the back of the truck. No cutting or splicing!

 

 

 

 

 

Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account