Need Help? 888.844.9763

Universal Second Cam option for Ford® Trucks w/ 8" Factory Display

Availabilty: In stock
SKU
CS-ULPM-SWF8
$223.00
 

Toggle between cameras!

This kit includes a plug and play harness that will allow you to use your 8" factory radio display and toggle between your factory installed back up camera and this universal camera when in reverse.  This is a universal camera that features two mounting options; it can be installed behind the license plate or on a flat vehicle surface with minimal surface area requirements.  The camera connects to the same connector on the back of your factory 8" display that your factory rear camera uses.

Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related item SKU: CS-RPW-P 

Adds the convenience of a 2nd rear camera to a tool box, headache rack, cab and chassis, or other specialty bed.  With this added camera you can see your fifth wheel hitch or anything else that is inside your bed without having to have a spotter guiding you for trailer connections etc.

The included harness allows you to choose which camera you want to display when in reverse by flipping a switch.

Notes about the included integration cable:

  • Truck must have a rear view camera that was installed at the factory and is displayed on your 8" factory radio screen
  • Kit includes a harness that allows you to connect both your factory tailgate camera and this universal camera to your factory radio.  The switch allows you to choose which one is displayed in reverse. 

Kit includes:

  • Dual mount camera system with high grade Super CMOS sensor for an ultra clear view, mount on license plate or universal bracket to be mounted anywhere
  • 25 foot harness
  • Wire connectors
  • Zip ties
  • Integration harness with toggle switch for Ford® 8" display
  • Install instructions

Camera Specifications:

  • Camera Source exclusive Super CMOS high grade sensor with night vision
  • Selectable parking guidelines (can be turned off if desired) When using parking lines, it is recommended to mount the camera on the centerline of the vehicle. NOTE: Black center line is not present on actual display.
  • 600 TV lines of resolution
  • <.2 lux minimum illumination - Outstanding night vision!
  • 170 degree viewing angle
  • 3 Year warranty

*Check compatibility tab to confirm model years.

 

More Information
SKUCS-ULPM-SWF8
Waterproof/Dustproof LevelIP68
Night Vision< .2 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution600 TVL
Parking GuidelinesSelectable on/off
Camera OrientationRear Facing
Fit TypeUniversal fit
ConnectionRCA with opt. Factory Interface
Sensor TypeCMOS
Sensor BrandEVI Systems
Viewing Angle170 Degrees
Camera Input Ports1
Warranty3 Year
Camera TypeRear Camera
Vehicle CategoryTruck, Camper/Trailer (if connecting to vehicle wiring)
Number of Cameras1
Reason for ShoppingAdding the camera(s)
Wiring TypeHard Wired
Camera Mount LocationUniversal Mount
For a monitor it usesYour factory display
Radio Screen Size8” Ford Sync 2, 8" Ford Sync 3
MakeFord
ModelF-150,Super Duty
Year2013,2014,2015,2016,2017,2018,2019,2020,2021,2022
Make FilterFord
Model FilterF-150, Super Duty
Year Filter2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

2013-2020 Ford® F150 trucks with a factory tailgate camera and 8" factory display. 

2013-2022 Ford® Super Duty trucks with a factory tailgate camera and 8" factory display.  

Only compatible with SYNC2 or SYNC 3 factory display. **Not compatible with trucks that have the 360 surround view system.

Remove the radio to gain access to the camera connector, install new plug and play harness.

Install the universal camera on either your license plate mount or on any flat surface - comes with two brackets. Then route the camera harness into the cab of the vehicle to the back of your factory display.  Plug the RCA connector from the camera harness into the T-harness.  Locate a reverse activated 12v power source and clean piece of metal for grounding.  Power connections for camera must be made inside the cab. 
Make installation even easier with an add on 12 Volt power source to eliminate the need to locate a power source on the vehicle and avoid cutting or splicing into factory wiring!  See related item SKU: CS-RPW-P
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies