Plug & Play Rear Flush Mount Cam Kit, Fits 2020-2021 Ford® Ranger

In Stock
SKU:
CS-20FRGR-FM
$199.00
 
Plug & Play Rear Flush Mount Cam Kit, Fits 2020-2021 Ford® Ranger is available to buy in increments of 1

Camera is FMVSS 111 compliant!  This is a plug and play camera kit that will allow you to replace your factory tailgate camera with this rear facing flush mount camera!

 

This universal camera mounts flush with a flat surface.  Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.

 

Kit includes the following:

  • Black rear facing flush mount camera with our latest super CMOS camera - the latest camera technology!
  • OEM conversion harness
  • 5', 10',15' 25' cable lengths available. Select from drop down above.
  • 22.5 mm hole saw
  • Zip ties
  • Installation instructions
  • 3 year limited camera warranty

Camera Specifications:

  • Super CMOS chip - outstanding color, contrast, and clarity!
  • Removable parking guidelines
  • 170 degree view
  • 600 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!

**Not compatible with trucks that have the 360 surround view system**  

 

More Information
SKU CS-20FRGR-FM
Video System NTSC
Waterproof/Dustproof Level IP 67
Night Vision .1 Lux
Power Supply 12 Volts
System Manufacturer EVI Systems
Camera Resolution 600 TVL
Parking Guidelines Selectable on/off
Camera Orientation Rear Facing
Fit Type Universal fit
Connection Factory Connector
Sensor Type Super CMOS
Viewing Angle 170 Degrees
Warranty 3 Year
Camera Type Rear Camera, Utility Bed Camera Systems
Vehicle Category Truck, Camper/Trailer (if connecting to vehicle wiring)
Number of Cameras 1
Reason for Shopping Relocating factory camera
Wiring Type Factory Plug&Play
Camera Mount Location Camper/Utility Bed, Universal Mount
For a monitor it uses Your factory display
Radio Screen Size Factory LCD
Make Ford
Model Ranger
Year 2020,2021

Ford® Ranger truck with a factory installed backup camera. This kit relies on the factory camera chassis harness to operate.  Not compatible if your truck has the 360 surround view system.

2020-2021 Ford® Ranger XLT and Lariat

Note:  The automatic lowering and power locking tailgate feature is disabled when using this kit as it is intended for applications where the tailgate is completely removed.

 

**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA).  Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01.  FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance. 

 

 

 

 

 

 

 

 

Camera requires a 22.5 mm hole on a flat surface for flush mounting.  It will require a flat section approximately 1" x 1" for mounting.  Drill the hole and connect the camera harness to the OEM conversion harness.  Run the cable to your factory backup camera connection under the truck and plug it in.

 

 

 

 

 

Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account