2019+ RAM Relocation kit for factory tailgate camera-Non Surround View
In Stock
SKU:
CS-DTR-19RN
2019+ RAM Relocation kit for factory tailgate camera-Non Surround View is available to buy in increments of 1
This is a universal mounting bracket that will allow you to relocate your factory installed tailgate camera on your 2019 RAM 1500, 2500, 3500 truck.
Aftermarket truck equipment manufacturers and upfitters often lose the rearview camera view altogether when removing a RAM Truck’s tailgate with built-in camera.
Unplug and remove your factory camera from your tailgate handle and install into the relocation housing and mount on any flat surface. Run the camera coaxial harness to the factory camera plug and reconnect.
The factory camera will function the same as before, just in a different location.
This kit is only compatible with 2019+ RAM 1500,2500,3500 trucks that came from the factory with the rearview camera system. Display not included. Camera is not included.
Kit includes the following:
- Universal mounting bracket designed for factory camera. **Camera not included**
- 14 foot extension harness
- Hardware
- 1 year warranty!
Not compatible with trucks that have the 360 surround view system. See SKU: CS-DTR-19R
| SKU | CS-DTR-19RN |
|---|---|
| System Manufacturer | EVI Systems |
| Connection | Factory Connector |
| Sensor Brand | EVI Systems |
| Warranty | 1 Year |
| Camera Type | Rear Camera, Utility Bed Camera Systems, Trailer/Camper/5th Wheel camera |
| Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
| Reason for Shopping | Relocating factory camera |
| Wiring Type | Factory Plug&Play |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| For a monitor it uses | Your factory display |
| Radio Screen Size | 8.4" Mopar |
| Make | Ram |
| Model | 1500,HD |
| Year | 2019,2020 |
2019+ RAM 1500, 2500,3500 trucks that came from the factory with a tailgate camera. Not compatible with trucks that have the 360 surround view system. For trucks with the 360 surround view system see SKU: CS-DTR-19R
This kit provides a way of maintaining the camera system after the vehicle’s tailgate has been removed.
Remove your existing factory tailgate camera and mount into the universal surface mount housing assembly. Mount the housing to any flat surface and run the camera extension harness to the factory plug under the truck.
If you like this product,You might also like these products
