Need Help? 888.844.9763

Surface Mount Camera, Fits 2019-2023 GM® Heavy Duty Cab-Chassis- 5 Pin

Availabilty: In stock
SKU
CS-19GMTRSM5-CC
$199.00
 

Easily add to a GM® Heavy Duty cab and chassis!

FMVSS 111 compliant! This kit is for Cab and Chassis vehicles only and these are rare so chances are you need the non-Cab and Chassis version.  See the compatibility tab for details before purchasing this kit.  This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a factory display that is already programmed for a camera.  Your truck must be prewired and programmed for a camera or this kit will not work. Please see the compatibility tab for more information! 
 
 
Use this camera for cab and chassis trucks that did not come with a bed from the factory. This universal camera is surface mounted so it will require a flat section approximately 1" x 1" for mounting.  Drill a small hole and run the cable through to your factory backup camera connection.  
 
*Factory radio must be programmed for a back up camera from the factory or by a dealership.
 
If your truck has the 8 pin square connector see SKU: CS-20GMHDSM8-CC  
 
Kit includes the following:
  • Chrome or Black plated rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
  • Mounting hardware
  • OEM conversion harness
  • 5', 10',15',25' cable lengths available
  • Zip ties
  • Installation instructions
  • 3 year limited camera warranty

 

Camera Specifications:

  • Super CMOS chip - outstanding color, contrast, and clarity!
  • Removable parking guidelines
  • 170 degree view
  • 600 TV lines of resolution
  • .1 lux minimum illumination - Outstanding night vision!
More Information
SKUCS-19GMTRSM5-CC
Video SystemNTSC
Waterproof/Dustproof LevelIP 67
Night Vision< .2 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution600 TVL
Parking GuidelinesSelectable on/off
Camera OrientationRear Facing
Fit TypeUniversal fit
ConnectionFactory Connector
Sensor TypeSuper CMOS
Viewing Angle150 Degrees
Warranty3 Year
Camera TypeRear Camera, Utility Bed Camera Systems
Vehicle CategoryTruck, Fleet Vehicle (i.e. cargo van)
Number of Cameras1
Reason for ShoppingRelocating factory camera
Wiring TypeFactory Plug&Play
Camera Mount LocationCamper/Utility Bed, Universal Mount
For a monitor it usesYour factory display
Radio Screen SizeFactory LCD
MakeGMC,Chevrolet
ModelSilverado HD,Sierra HD
Year2019,2020,2021,2022,2023
Make FilterChevrolet, GMC
Model FilterSierra HD, Silverado HD
Year Filter2019, 2020, 2021, 2022, 2023

2019-2023 GM 2500,3500,4500,5500 Cab and Chassis with the 5 pin connector

2019-2023 International CV

Truck must be pre-wired for a camera from the factory and have a factory display that is programmed to recognize a back up camera. 

This kit relies on the factory camera chassis harness to operate.  

Not compatible if your truck has the 360 view system.

If your truck has the 8 pin square connector see SKU: CS-20GMHDSM8-CC

See our other GM® truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate.  This kit will only work on the trucks that came from the factory without a bed.  Please verify the connector shown in the photos against the connector on your truck before ordering.  If you are still not sure please call us for assistance.

 

**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA).  Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01.  FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.  

 

 

 

 

 

 

 

 

 

 

Camera is drill-in style for flat mounting.  It will require a flat section approximately 1" x 1" for mounting.  Drill a small hole and connect the camera harness to the OEM conversion harness.  Run the cable to your factory backup camera connection under the truck and plug it in.

 

 

 

 

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies