Skip to the beginning of the images gallery

Flush Mount Camera with Programmer For 2017-2020 Super Duty Cab and Chassis

Availabilty: In stock

SKU

CS-17SDFM4-CCP

Be the first to review this product

$378.00

Includes programmer

Description

FMVSS 111 compliant! This kit is for Cab and Chassis vehicles only and these are rare so chances are you need the non-Cab and Chassis version. See the compatibility tab for details before purchasing this kit. This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a 4.2" or 8" factory display. Your truck must be prewired for a camera or this kit will not work. Please see the compatibility tab for more information!

Use this camera for factory ordered cab and chassis trucks. This universal camera mounts flush with a flat surface. Drill a 22.5mm hole(hole saw included) and run the cable through to your factory backup camera connection.

The kit also comes with the radio programmer tool so you can turn on the camera function quickly and easily- without having to go to a dealer!

Kit includes the following:

Black rear facing surface mount camera with our latest super CMOS camera - the latest camera technology!
OBD Programmer
OEM conversion harness 6',9',16',32',64' cable lengths available. Select from drop down above.
22.5 mm hole saw
Installation instructions
3 year limited camera warranty

Camera Specifications:

Super CMOS chip - outstanding color, contrast, and clarity!
Removable parking guidelines
150 degree view
600 TV lines of resolution
.1 lux minimum illumination - Outstanding night vision!

**Not compatible with Super Duty trucks that have the 360 degree view system** See CS-FTRSKLP-17SD-TRL.

Specifications

More Information
SKU	CS-17SDFM4-CCP
Video System	NTSC
Waterproof/Dustproof Level	IP 67
Night Vision	< .2 Lux
Power Supply	12 Volts
System Manufacturer	EVI Systems
Camera Resolution	600 TVL
Parking Guidelines	Selectable on/off
Camera Orientation	Rear Facing
Fit Type	Universal fit
Connection	Factory Connector
Sensor Type	Super CMOS
Viewing Angle	150 Degrees
Warranty	3 Year
Camera Type	Rear Camera, Utility Bed Camera Systems
Vehicle Category	Truck, Fleet Vehicle (i.e. cargo van)
Number of Cameras	1
Reason for Shopping	Adding the camera(s)
Wiring Type	Factory Plug&Play
Camera Mount Location	Camper/Utility Bed, Universal Mount
For a monitor it uses	Your factory display
Radio Screen Size	4.2” Ford, 8” Ford Sync 2, 8" Ford Sync 3
Make	Ford
Model	Cab & Chassis
Year	2017,2018,2019,2020
Make Filter	Ford
Model Filter	Cab & Chassis
Year Filter	2017, 2018, 2019, 2020

Compatibility

2017-2020 Ford® Super Duty F350, F450, F550 cab and chassis trucks that have been pre-wired for a camera from the factory and have a 4.2" or 8" SYNC 3 display from the factory.

This kit relies on the factory camera chassis harness to operate.

Not compatible if your truck has the 360 view system.

See our other Super Duty truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate. This kit will only work on the trucks that came from the factory without a bed. Please verify the connector shown in the photos against the connector on your truck before ordering. If you are still not sure please call us for assistance.

**EVI Systems has certified this camera system to comply with FMVSS 111 regulations as set forth by the National Highway Traffic Safety Administration (NHTSA). Testing has been performed jointly in-house and by a certified laboratory to meet or exceed the minimum requirements set forth by TP-111-V-01. FMVSS 111 field of view requirements and any other vehicle related certification is ultimately the responsibility of the vehicle up-fitter to ensure compliance.

Installation

Camera requires a 22.5 mm hole on a flat surface for flush mounting. It will require a flat section approximately 1" x 1" for mounting. Drill the hole and connect the camera harness to the OEM conversion harness. Run the cable to your factory backup camera connection under the truck and plug it in.

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Question & Answers

Q: Can the OBD programmer be used on more than one vehicle?

A: No, the programmer is VIN locked to your vehicle after one use. Once the seal on the programmer is broken the programmer can't be returned. After you've programmed your factory radio it is recommended that you store the programmer in the glovebox just in case programming is ever lost due to vehicle servicing, etc.

Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.