Need Help? 888.844.9763

Commercial Camera with Programmer Fits 2017-2020 Super Duty Cab and Chassis

Availabilty: In stock
SKU
CS-17SDSK-CCP
$428.00
 

Easily add to a Super Duty cab and chassis!

This kit is for Cab and Chassis vehicles only and these are rare so chances are you need the non-Cab and Chassis version.  See the compatibility tab for details before purchasing this kit.  This is a plug and play camera kit that will allow you to add a camera to a cab and chassis truck that has been pre-wired at the factory and has a 4.2" or 8" factory display. Your truck must be prewired for a camera or this kit will not work. Please see the compatibility tab for more information! 

 

Use this camera for cab and chassis trucks that did not come with a bed from the factory. Simply mount the camera on any flat surface and run the cable to your factory backup camera connection for a simple and seamless installation.  Choose the cable length from the drop down above.

The kit also comes with the radio programmer tool so you can turn on the camera function quickly and easily- without having to go to a dealer!

 

Kit includes the following:

  • Heavy duty commercial camera with Sony CCD sensor
  • OEM to commercial coax conversion harness-plug and play!
  • Coaxial wire harness with weather tight connectors (select length above)
  • Camera harness has factory ends for plug and play with your existing wiring.
  • OBD programmer for 4.2" or 8" factory display. Select screen size above.

Camera Specifications:

  • Sony Ultra CCD for a clear image
  • Infra-red LED's that will create a daytime like display even in complete darkness
  • 150 degree view
  • 700 TV lines of resolution
  • 0 lux (no light required to operate)
  • Heavy cast casing and steel mounting bracket
  • Locking weather tight connector
  • 1 year camera warranty!

**Not compatible with Super Duty trucks that have the 360 degree view system**  See CS-FTRSK-17SD-TRL.

More Information
SKUCS-17SDSK-CCP
Agriculture / CommercialCommercial
Cam Only/Complete KitComplete Kit
Video SystemNTSC
Waterproof/Dustproof LevelIP 67
Night Vision0 Lux
Power Supply12 Volts
System ManufacturerEVI Systems
Camera Resolution600 TVL
Parking GuidelinesNot Available
Camera OrientationRear Facing
Fit TypeUniversal fit
ConnectionFactory Connector
Sensor TypeCCD
Viewing Angle150 Degrees
Warranty1 Year
Camera TypeRear Camera, Utility Bed Camera Systems
Vehicle CategoryTruck, Fleet Vehicle (i.e. cargo van)
Number of Cameras1
Reason for ShoppingAdding the camera(s)
Wiring TypeFactory Plug&Play
Camera Mount LocationCamper/Utility Bed, Universal Mount
For a monitor it usesYour factory display
Radio Screen SizeFactory LCD
MakeFord
ModelCab & Chassis
Year2017,2018,2019,2020
Make FilterFord
Model FilterCab & Chassis
Year Filter2017, 2018, 2019, 2020

2017-2020 Ford® Super Duty F350, F450, F550 cab and chassis trucks that have been pre-wired for a camera from the factory and have a 4.2" or 8" SYNC 3 display from the factory. 

This kit relies on the factory camera chassis harness to operate.  

Not compatible if your truck has the 360 view system.

See our other Super Duty truck options if your truck came from the factory with a bed and you are removing the bed to add service body, utility bed, dump truck, flat bed, and any other application where you do not have a tailgate.  This kit will only work on the trucks that came from the factory without a bed.  Please verify the connector shown in the photos against the connector on your truck before ordering.  If you are still not sure please call us for assistance.  

 

 

 

 

 

 

 

 

 

Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location. Camera tilt is adjustable so the view can be adjusted to accommodate any view required!  Plug OEM adapter harness into the factory camera harness under the truck.

Plug the OBD programmer into the OBD port.  Programming takes less than a minute!

 

 

 

 

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Q:  Can the OBD programmer be used on more than one vehicle?

A:  No, the programmer is VIN locked to your vehicle after one use. Once the seal on the programmer is broken the programmer can't be returned.  After you've programmed your factory radio it is recommended that you store the programmer in the glovebox just in case programming is ever lost due to vehicle servicing, etc.  

 

Only registered users can write question. Please Sign in or create an account

NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.

Need Help Deciding? Use Our Wizard

Easy steps to find the right product for your vehicle.

Product Selection Wizard

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount

10% OFF Discount for Military and Public Service Workers

Thank You Veterans and Civil Servants!

Get the Discount
Do You Need Any Help? Give Us a Call. 888-844-9763
Copyright 2022 © Camera Source. All rights reserved. Privacy Policy and Cookie Policy | Enable Cookies