Plug and Play Commercial Grade Camera Kit, Fits 2010-2021 Toyota® Tundra
Uses your factory camera connector!
This is a plug and play camera kit that will allow you to mount a camera on your camper or trailer and have it plug into the existing camera connector behind your rear bumper.
Use this camera for bed campers, trailers, or any other application where you are required to remove your factory tailgate. Simply mount the camera on any surface and run the coax cable to your factory backup camera connection behind the rear bumper for a simple and seamless installation. The coaxial cable can be ordered in three sizes - 10', 16' or 32', Selectable from this product page.
Kit includes the following:
- CCD heavy duty commercial camera with Sony internal image sensor
- 10', 16' or 32' coaxial wire harness with weather tight connectors - NOTE: 6v camera is not capable of longer than 32' cable due to signal loss
- Camera pigtail harness, which adapts to the factory connectors for plug and play with your existing wiring
- One year warranty!
Camera Specifications:
- Sony CCD 700 TV lines of resolution
- Integrated infra-red LED's that will create a daytime like display even in complete darkness
- 170 degree view
- 6 volt input designed specifically for Toyota® applications
- 0 lux (no light required to operate)
- Heavy cast casing, steel mounting bracket
- Locking weather tight connector
| SKU | CS-10TUN-SK |
|---|---|
| Video System | NTSC |
| Waterproof/Dustproof Level | IP 67 |
| Night Vision | 0 Lux |
| Power Supply | 6 Volts |
| System Manufacturer | EVI Systems |
| Camera Resolution | 700 TVL |
| Parking Guidelines | Not Available |
| Camera Orientation | Rear Facing |
| Fit Type | Universal fit |
| Connection | Factory Connector |
| Sensor Type | CCD |
| Sensor Brand | Sony |
| Viewing Angle | 170 Degrees |
| Warranty | 1 Year |
| Camera Type | Rear Camera, Utility Bed Camera Systems, Trailer/Camper/5th Wheel camera |
| Vehicle Category | Truck, Camper/Trailer (if connecting to vehicle wiring) |
| Number of Cameras | 1 |
| Reason for Shopping | Relocating factory camera |
| Wiring Type | Factory Plug&Play |
| Camera Mount Location | Camper/Utility Bed, Universal Mount |
| For a monitor it uses | Your factory display |
| Make | Toyota |
| Model | Tundra |
| Year | 2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021 |
| Make Filter | Toyota |
| Model Filter | Tundra |
| Year Filter | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
2010-2021 Tundra with factory installed backup camera.
NOTE: vehicle must have come from the factory with a rear camera in order for this kit to function. Not compatible with trucks that have multiple cameras from the factory.
Mount the camera anywhere! Versatile mount allows for surface mount in virtually any location.
Camera tilt is adjustable so the view can be adjusted to accommodate any view required!
Q: What are the camera dimensions? (with bracket)
A: 3" L x 2 1/2" W x 3" H
NOTE: Your question may be included on the product page but your name will not be displayed for privacy reasons.
10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount 10% OFF Discount for Military and Public Service Workers
Thank You Veterans and Civil Servants!
Get the Discount